ZIXI Pull

Click on the Sources tab to configure.

The device supports directly pasting the ZIXI platform URL, and it will automatically parse and add the data source. Alternatively, you can manually specify the parameters.

  • Protocol Type: Set the protocol type to ZIXI Pull.
  • Name: Default is ZIXI Server. You can specify a name for the task to manage multiple servers easily. (Supports 1-63 characters including A-Z, a-z, 0-9, spaces, special characters: ._-+'[]() and cannot start or end with a space.)
  • Host: Enter the IP address or domain name of the ZIXI Pull host.
  • Port: Default is 2077, valid range is 1-65535.
  • Stream ID: The unique ID for identifying the stream. Required field. Range: 1 - 127 characters, case-sensitive.
  • Password: Enter the password for the ZIXI server to authenticate the stream. Range: 0 - 127 characters.
  • Latency: Range is 20 ~ 5000ms, default is 200ms. It is recommended to keep the delay time consistent between the receiving and sending sides.
  • Minimize Latency: Enable dynamic latency. Zixi supports dynamic delay, adjusting automatically based on network conditions. Suitable for non-live sports broadcasting.
  • Ignore TLS Certificate Errors: Check to ignore TLS (Transport Layer Security) certificate errors. Default is disabled.
  • Decryption Mode: Not used by default. Supports AES encryption for stream data security. AES-128/192/256 encryption is supported. You must specify the Decryption Key (10-79 characters). The same key must be used on both the sending and receiving ends for successful decryption.
  • Buffer Duration: Range is 1 ~ 5000ms, default is 60ms. It is recommended that the delay time of the decoder be consistent with that of the stream sender.
  • Hotkey: Disabled by default. Once configured, you can switch data sources quickly through the keyboard hotkeys connected to the decoder. This feature is disabled if the Profile function is enabled.
  • Audio Track: Default 1, optional 1–8 tracks.
  • TS ProgID: Program ID (Program Number) is an identifier that represents a logical program (service) within an MPEG Transport Stream, range 1–10000000, default empty.
  • OK: Save the current settings.